Zhejiang ZUCH Technology Co., Ltd.
Connecting Terminals · Splice Terminal Series
TS00034J-10 18-22AWG Serrated Splice Terminal Overview
TS00034J-10 is listed as a Serrated in ZUCH’s Splice Terminal Series under the Connecting Terminals product line. It is intended for harness, appliance and equipment engineers selecting a terminal interface. Published values are reproduced below; confirm the current drawing, mating parts and project validation before ordering.
Selection guide
Serrated Splice Terminal Wire and Connection Selection
Use the model facts as a starting point, then verify the mating system and project conditions with the latest ZUCH documents.
-
Wire Or Crimping Range
Compare the published wire or crimping range for this model with the mating part, harness and project requirement before approval.
-
Mating Interface And Direction
Compare the published mating interface and direction for this model with the mating part, harness and project requirement before approval.
-
Material, Surface Treatment And Environment
Compare the published material, surface treatment and environment for this model with the mating part, harness and project requirement before approval.
Supplier context
ZUCH Engineering and Manufacturing for Serrated Splice Terminal Projects
ZUCH states that it was founded in 1994 and operates with multiple subsidiaries and production bases. It also reports R&D, laboratory and smart-manufacturing capabilities. These are supplier-level statements and do not replace model-specific qualification.
Official resources
TS00034J-10 Drawings and Serrated Splice Terminal Selection Resources
Only resources exposed by the product page are linked here. If a required file is not listed, request the current revision from ZUCH.
- Model-specific filesAsk ZUCH for the current drawing, specification and compliance files for this model.
Frequently asked questions
Serrated Splice Terminal Selection and Assembly FAQ
What is the TS00034J-10 serrated terminal used for?
TS00034J-10 is a serrated terminal in ZUCH’s Splice Terminal Series. Selection depends on the conductor arrangement and the joining geometry shown in the drawing. Confirm the complete splice design before adding it to a harness or equipment assembly.
Which wire sizes and conductor combinations fit TS00034J-10?
The catalog lists a 18-22AWG range. Confirm the permitted conductor construction, total bundle size, number of wires and insulation support for the exact splice; a single-wire range does not establish every multi-wire combination.
Can I replace a splice with a different terminal shape?
Different splice geometries require different conductor arrangements and tooling. Match TS00034J-10 to the approved assembly drawing, retention requirements and electrical qualification; do not infer equivalence from the material or series name. Confirm the assembly requirements with ZUCH.
Which crimping tool should I use for TS00034J-10?
Select tooling for the listed 18-22AWG wire range and the exact terminal geometry. Ask ZUCH for the approved die, wire-preparation and crimp specification. A general-purpose crimper is not automatically suitable. Confirm the assembly requirements with ZUCH.
How much current can TS00034J-10 carry?
The public catalog does not publish a rated current for this exact model. Do not derive an ampere rating from terminal color, wire range or a similar part; request the application limit from ZUCH. Confirm the assembly requirements with ZUCH.
What material and finish are specified for TS00034J-10?
The specified material is Copper Alloy. The surface treatment is listed as None-plated. Match the finish to the approved mating contact and environment; request the material declaration or drawing if the project requires a specific alloy or coating thickness. Confirm the assembly requirements with ZUCH.
Can TS00034J-10 be used in heat, moisture or vibration?
The public catalog does not specify an operating-temperature range. The terminal entry does not establish a sealed assembly or a vibration-test result. Confirm the enclosure, insulation and environmental validation required for your application.
How do I check the finished connection made with TS00034J-10?
Check conductor placement, terminal retention and the connection against the approved application drawing. Ask ZUCH to specify the applicable mechanical and electrical acceptance limits; a visual check alone does not establish the complete assembly rating. Confirm the assembly requirements with ZUCH.
Need help with your project?
Share the model, drawings and application requirements with the ZUCH team.
Project enquiry
Request a Quote for TS00034J-10 Serrated Splice Terminal
Send the exact model and project inputs so ZUCH can confirm unpublished specifications, document revisions and purchasing terms.
