TS00056K-12 22-24AWG U-Shaped Splice Terminal Overview

TS00056K-12 is listed as a U-Shaped in ZUCH’s Splice Terminal Series under the Connecting Terminals product line. It is intended for harness, appliance and equipment engineers selecting a terminal interface. Published values are reproduced below; confirm the current drawing, mating parts and project validation before ordering.

Selection guide

U-Shaped Splice Terminal Wire and Connection Selection

Use the model facts as a starting point, then verify the mating system and project conditions with the latest ZUCH documents.

Wire Or Crimping Range

Compare the published wire or crimping range for this model with the mating part, harness and project requirement before approval.

Discuss requirements
Mating Interface And Direction

Compare the published mating interface and direction for this model with the mating part, harness and project requirement before approval.

Discuss requirements
Material, Surface Treatment And Environment

Compare the published material, surface treatment and environment for this model with the mating part, harness and project requirement before approval.

Discuss requirements

Injection molding workshop shown on the ZUCH manufacturing page

Stamping workshop shown on the ZUCH manufacturing page

Supplier context

ZUCH Engineering and Manufacturing for U-Shaped Splice Terminal Projects

ZUCH states that it was founded in 1994 and operates with multiple subsidiaries and production bases. It also reports R&D, laboratory and smart-manufacturing capabilities. These are supplier-level statements and do not replace model-specific qualification.

Review About ZUCH · Review R&D and manufacturing

Official resources

TS00056K-12 Drawings and U-Shaped Splice Terminal Selection Resources

Only resources exposed by the product page are linked here. If a required file is not listed, request the current revision from ZUCH.

Model-specific filesAsk ZUCH for the current drawing, specification and compliance files for this model.

Frequently asked questions

U-Shaped Splice Terminal Selection and Assembly FAQ

What is the TS00056K-12 u-shaped splice terminal used for?

TS00056K-12 is a u-shaped splice terminal in ZUCH’s Splice Terminal Series. Selection depends on the conductor arrangement and the joining geometry shown in the drawing. Confirm the complete splice design before adding it to a harness or equipment assembly.

Which wire sizes and conductor combinations fit TS00056K-12?

The catalog lists a 22-24AWG range. Confirm the permitted conductor construction, total bundle size, number of wires and insulation support for the exact splice; a single-wire range does not establish every multi-wire combination.

Can I replace a splice with a different terminal shape?

Different splice geometries require different conductor arrangements and tooling. Match TS00056K-12 to the approved assembly drawing, retention requirements and electrical qualification; do not infer equivalence from the material or series name. Confirm the assembly requirements with ZUCH.

Which crimping tool should I use for TS00056K-12?

Select tooling for the listed 22-24AWG wire range and the exact terminal geometry. Ask ZUCH for the approved die, wire-preparation and crimp specification. A general-purpose crimper is not automatically suitable. Confirm the assembly requirements with ZUCH.

How much current can TS00056K-12 carry?

The public catalog does not publish a rated current for this exact model. Do not derive an ampere rating from terminal color, wire range or a similar part; request the application limit from ZUCH. Confirm the assembly requirements with ZUCH.

What material and finish are specified for TS00056K-12?

The specified material is Copper Alloy. The surface treatment is listed as Matte Tin-plated. Match the finish to the approved mating contact and environment; request the material declaration or drawing if the project requires a specific alloy or coating thickness. Confirm the assembly requirements with ZUCH.

Can TS00056K-12 be used in heat, moisture or vibration?

The catalog records a usage environment of -40°~105°. Confirm the unit and test conditions on the current drawing. The terminal entry does not establish a sealed assembly or a vibration-test result. Confirm the enclosure, insulation and environmental validation required for your application.

How do I check the finished connection made with TS00056K-12?

Check conductor placement, terminal retention and the connection against the approved application drawing. Ask ZUCH to specify the applicable mechanical and electrical acceptance limits; a visual check alone does not establish the complete assembly rating. Confirm the assembly requirements with ZUCH.