Blog

How to Maintain Industrial Rectangular Connectors When a maintenance supervisor in Rotterdam encountered repeated intermittent stops on a packaging line, the team wiped the exposed connector faces during a rushed shutdown; a corroded contact then lost continuity as the line restarted. The reversal came after the assembly was isolated and reviewed: the failure was not […]

Rectangular Connector Types Rectangular connector types are best separated by the interface they create: board-to-board, wire-to-board, wire-to-wire and panel-mount systems solve different mechanical and service problems. The most common selection error is choosing a pitch or housing shape before defining the mating architecture, cable route, keying, sealing, retention and maintenance plan. This revision turns the […]

IP65 vs IP67 Rectangular Connectors: Which One Do You Need? IP65 and IP67 are not a simple low-versus-high ranking. The second digit describes different water-test exposures, so the correct choice depends on the actual event, mated state, cable entry, enclosure, drainage and maintenance condition. A connector housing, cable gland and installed assembly can have different […]

Learn how to specify custom rectangular power connectors for thermal, retention, insulation, testing, and production-ready OEM sourcing in electrical equipment.

How to Remove PCB Connectors: A Step-by-Step Guide with the Right Tools PCB connector removal has two different failure paths: releasing a mated interface and removing a connector that is soldered or mechanically restrained to the board. Pulling on wires, adding heat before identifying the restraint, or using an unverified tool can damage terminals, pads, […]

How to Work with Power Connector Installation for Smart Home and Appliance Hardware Power-connector installation becomes a production problem when a pilot sample is mistaken for a released process. The design must control polarity, cavity assignment, mating direction, secondary locks, termination, routing, inspection and change records across the actual appliance. A branded accessory or familiar […]